Running The Basic Appli- Ance Care Programme On The Appliance - Siemens WT47XKH1ES User Manual

Hide thumbs Also See for WT47XKH1ES:
Table of Contents

Advertisement

18.4 Running the basic appli-
ance care programme on
the appliance
To remove any light soiling, you can
run a basic appliance care pro-
gramme.
Note: After a certain period of use,
the appliance automatically recom-
mends that you run the basic appli-
ance care programme. Before the
start and end of the programme, the
display shows the note "CrE" for 5
seconds. The note is shown re-
peatedly until the basic appliance
care programme has been run com-
pletely.
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 41.
¡ The appliance care programme
has started.
→ "Starting the appliance care pro-
gramme", Page 42
Add approx. 1 ½ litres of hot tap
1.
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press inicio pausa+carga
3.
a The appliance care programme
starts and an audible signal
sounds.
a "-0-"  appears on the display once
the appliance care programme has
ended and an audible signal
sounds.
Pull out the condensation con-
4.
tainer, keeping it level.
Appliance care en
⁠ .
43

Advertisement

Table of Contents
loading

Table of Contents