Table of Contents
Advertisement
en Appliance care
18.2 Preparing the condensa-
tion container for the ap-
pliance care programme
Note: If the condensation is drained
using the drain hose, the condensa-
tion container must be prepared be-
fore the basic or intensive appliance
care programme.
→ "Water drain hose", Page 14
Remove the stopper from the re-
1.
cess in the condensation con-
tainer.
Insert the plug from below.
2.
a The condensation container is
ready for the appliance care pro-
gramme.
Note: If the condensation is drained
using the drain hose, perform the
above-mentioned steps after the ba-
sic or intensive appliance care pro-
gramme in the reverse order.
42
18.3 Starting the appliance
care programme
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 41.
¡ The condensation container is
ready for the appliance care pro-
gramme.
→ "Preparing the condensation
container for the appliance care
programme", Page 42.
Press
.
1.
The switch-on process takes a few
seconds.
Set the programme to position 1.
2.
Press and hold tipo secado
3.
Set the programme to position 4.
4.
Release tipo secado
5.
a "CP1" and the programme dura-
tion alternate on the display.
.
.
Advertisement
Table of Contents
