Table of Contents
Advertisement
en Troubleshooting
Fault
and programme
terminated.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The programme does
not start.
The length of the pro-
gramme changes dur-
ing the drying cycle.
54
Cause and troubleshooting
Ensure that the water drain hose is not kinked or
1.
trapped.
Route the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Water drain hose is blocked.
Rinse the water drain hose with tap water.
▶
The filter for the condensation tank is soiled.
→ "Clean the filter for the condensation tank.",
▶
Page 50.
Foreign object is located in the base unit
→ "Opening the base unit", Page 48.
1.
Remove the foreign objects that are present.
2.
→ "Closing the base unit", Page 48.
3.
Dirt in the appliance.
Preparing the appliance for the intensive appliance
▶
care programme.
→ "Preparing the appliance for the intensive appli-
ance care programme", Page 44.
The appliance uses condensation for the automatic
self-cleaning.
Not a fault – no action required.
▶
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 32
▶
You have not pressed inicio pausa+carga
Press inicio pausa+carga
▶
No programme set.
→ "Setting a programme", Page 28.
1.
→ "Starting the programme", Page 29.
2.
The programme operation is optimised electronically.
This may change the programme duration.
Not a fault – no action required.
▶
.
.
Advertisement
Table of Contents
