Troubleshooting
Troubleshooting
Phenomenon
All the FAN lamps are blinking
together.
Sometimes the Streamer lamp
does not light up
The Streamer lamp blinks
The MODE lamp blinks
19
Check points
• Are the pre-filters and dust collection filter attached?
These lamps may blink if the unit is operated without a
part attached.
[If one or more parts are not attached]
¼ Remove the power supply plug, reattach the parts and then
turn the unit on again.
[If all parts are attached]
An electrical component is faulty.
¼ Contact the place of purchase.
• Is there a buildup of dust on the pre-filters?
[If there is a dust buildup] ►Page 13
¼ Remove the power supply plug, clean the pre-filters and
then turn the unit on again.
[If there is no dust buildup]
An electrical component is faulty.
¼ Contact the place of purchase.
• Is the air outlet blocked?
[If the air outlet is blocked]
¼ Remove any obstacles blocking the air outlet and then turn
the unit on again.
[If the air outlet is not blocked]
An electrical component is faulty.
¼ Contact the place of purchase.
The lamps may blink if there is a sudden voltage fluctuation.
The lamps will return to their previous condition once voltage
returns to normal.
Voltage range protection: 198V – 264V.
• If none of the conditions above occurs,
¼ Contact the place of purchase. It is recommended to unplug
the unit until the service agent is arrive.
• The Streamer may stop operation depending on the time
control.
Streamer lamp turns off when the Streamer stop operating.
• Streamer is recommended to be replaced.
¼ Contact the place of purchase.
• Is the deodorising filter unit attached?
¼ Attach the deodorising filter unit. ►Page 14