Appendix A. Alternative Configuration For Your Ewon Device; Assign An Ip Address; Talk2M Account Configuration - HMS Networks Ewon Cosy+ User Manual

Alternative configuration for your Ewon device

Appendix A. Alternative configuration for your Ewon device

If for some reasons you could not configure the Ewon using the default USB method explained above, you can
also configure the Ewon by using its Web interface.
In this section, we will explain how to configure your Ewon
1. Assign an IP address to your Ewon
®
2. Register your Ewon Cosy+ to a Talk2M account.
3. Access the web interface of the Ewon
®
4. Configure your Ewon Cosy+ using the Embedded Wizard Setup.

1. Assign an IP Address

You can establish the first communication with the Ewon
Software (page 3) for more details about eBuddy).
By default, the IP address of the Ewon
changed.
To change the IP address of the Ewon
1. Connect the port labeled as LAN (port #1) of the Ewon
This can be done either point-to-point (computer & Ewon
®
the Ewon Cosy+ will not conflict with another connected device.
2. Start the eBuddy application.
The application scans through the Ethernet adapter network, identifies the connected Ewon devices and
display their IP address, subnet mask and serial number.
eBuddy also allows the modification of the default IP address without necessarily being in the same network
range.
3. Optional: Highlight the row representing the device to be modified.
4. Click on the button Set IP from the top bar menu.
5. Indicate the serial number of the Ewon
• If you went through step #3, the serial number is provided automatically.
6. Click Next.
7. Enter the <new IP address> and its <subnet mask>.
• By clicking Next, eBuddy sends the commands to the Ewon
reboot.
8. Once the reboot completes, you can access the Ewon

2. Talk2M Account Configuration

Talk2M offers a secured and easy way to set up a remote connection over the Internet.
To allow the remote access, you need to link the Ewon
Talk2M account.
To configure the Talk2M account:
UM-0006-00 1.2 en-US
®
Cosy+ using the Embedded Wizard setup:
®
Cosy+, different than the default IP address.
®
Cosy+.
®
Cosy+ using the eBuddy application (check
®
Cosy+ is set to 10.0.0.53 which in some circumstances might need to be
®
Cosy+, proceed as follows:
®
Cosy+.
®
Cosy+) or through a network if the default IP of
®
Cosy+ that you want to modify.
®
Cosy+ using its new LAN IP address.
®
Cosy+ to the Talk2M infrastructure, more specifically to a
®
Cosy+ to change its IP address and to
®
Ewon Cosy+
Page 27 of 38