Maintaining Your Dryer; Cleaning The Exterior; Cleaning The Drum; Cleaning The Control Panel - Insignia NS-TDRE67W1-C User Manual

OPERATING INSTRUCTIONS
Warning symbols for laundering
Do not wash
Do not wring
Do not bleach
Do not tumble dry
No steam (added to iron)
Do not iron

Maintaining your dryer

Cleaning the exterior

• Clean with a soft, damp cloth. Do not use abrasive substances.
• Protect the surface from sharp objects.
• Do not place any heavy or sharp objects or a detergent box on the dryer.
Keep them in a separate storage area. These items may scratch or damage
the top cover of the dryer.
• Because the entire dryer has a high-gloss finish, the surface can be scratched
or damaged. Avoid scratching or damaging the surface when using the dryer.

Cleaning the drum

• Clean with a damp cloth dampened with a mild, non-abrasive cleaner
suitable for stainless steel and anodized surfaces.
• Remove the cleaner residue and dry with a clean cloth.

Cleaning the control panel

• Clean with a soft, damp cloth. Do not use abrasive substances.
• Do not spray cleaners directly on the panel. The control panel finish may be
damaged by some laundry pre-treatment soil and stain remover products.
Apply such products away from your dryer and wipe up any spills or
over-spray immediately.

Cleaning and inspecting the exhaust system

Inspect and clean the exhaust yearly to maintain optimum performance.
Disconnect the exhaust duct from the dryer and from the exhaust hood (at the
1
exhaust outlet) outside of the building.
Check the interior of the duct and remove any lint accumulation.
2
Make sure that lint is removed from the exhaust hood. Lint may collect in the
3
exhaust hood so that the flappers or louvers will not open or close completely.
Dry clean
www.insigniaproducts.com
12-Cycle Electric and Gas Dryers
Dry clean
Do not dry clean
Line dry/Hang to dry
Drip dry
Dry flat
41