Linksys WEC600N User Manual page 8

Chapter3
Site Information
For each network selected, the following settings are
listed:
Wreless Mode This is the mode of the wireless network
currently in use.
Network Type
This is the network type used by your
wireless network.
Rado Band
This is the radio band used by your wireless
network.
Securty This is the status of the wireless security
feature.
MAC Address
This is the MAC address of the wireless
network's wireless router or access point.
Refresh Click Refresh to perform a new search for
wireless devices.
Connect
To connect to one of the networks on the list,
select the wireless network, and click Connect. If the
network's wireless security is enabled, then one of these
wireless security screen appears:
WEP (Wired Equivalent Privacy)
If the network has WEP encryption enabled, then you see
the WEP Key Needed for Connection screen.
WEP Security
WEP Select -bt or 128-bt encryption.
Passphrase Enter the network's Passphrase, so a
WEP key is automatically generated. The passphrase is
case-sensitive and must be 16 or fewer alphanumeric
characters. It must match the passphrase of your other
wireless network devices and is compatible with Linksys
wireless products only. (For non-Linksys wireless products,
enter the WEP key manually.)
Dual-Band Wreless-N ExpressCard
WEP Key If you do not have the Passphrase, enter
the WEP key, which must match the WEP key of your
wireless network. For 64-bit encryption, enter exactly 10
hexadecimal characters ("0" to "9" and "A" to "F".) For 128-bit
encryption, enter exactly 26 hexadecimal characters.
To connect to the network, click Connect. To cancel the
connection, click Cancel.
WPA (Wi-Fi Protected Access)
If the network has WPA Personal security enabled, then
you see the WPA Personal Needed for Connection screen.
WPA-Personal Security
Encrypton
Select the type of algorithm you want to use,
TKIP or AES.
Pre-shared Key
Enter the network's Pre-shared Key of 8-
63 characters.
To connect to the network, click Connect. To cancel the
connection, click Cancel.
WPA2 (Wi-Fi Protected Access 2)
If the network has WPA2 Personal security enabled, then
you see the WPA2 Personal Needed for Connection screen.
WPA2-Personal Security
Configuration