Linksys WEC600N User Manual page 10

Chapter3
1. If you have wireless security enabled on your network,
continue to step 2. If you do not have wireless security
enabled, continue to step 3.
2. If your network has WEP, WPA-Personal,
WPA2-Personal wireless security enabled, then that
security screen appears. Continue to the screen for
your wireless security.
WEP
If the network has WEP encryption enabled, then you see
the WEP Key Needed for Connection screen.
WEP Security
WEP Select -bt or 128-bt encryption.
Passphrase
Enter the network's Passphrase, so a
WEP key is automatically generated. The passphrase is
case-sensitive and must be 16 or fewer alphanumeric
characters. It must match the passphrase of your other
wireless network devices and is compatible with Linksys
wireless products only. (For non-Linksys wireless products,
enter the WEP key manually.)
WEP Key
If you do not have the Passphrase, enter
the WEP key, which must match the WEP key of your
wireless network. For 64-bit encryption, enter exactly 10
hexadecimal characters ("0" to "9" and "A" to "F".) For 128-bit
encryption, enter exactly 26 hexadecimal characters.
Click Connect and proceed to step 3.
Dual-Band Wreless-N ExpressCard
WPA Personal
If the network has WPA Personal security enabled, then
you see the WPA Personal Needed for Connection screen.
or
Encrypton Select the type of algorithm you want to use,
TKIP or AES.
Pre-shared Key
63 characters.
Click Connect and proceed to step 3.
WPA2 Personal
If the network has WPA2 Personal security enabled, then
you see the WPA2 Personal Needed for Connection screen.
Pre-shared Key
63 characters.
Click Connect and proceed to step 3.
3. After the profile installs, the Congratulations screen
appears. Click Fnsh.
Configuration
WPA-Personal Security
Enter the network's Pre-shared Key of 8-
WPA2-Personal Security
Enter the network's Pre-shared Key of 8-