Linksys WEC600N User Manual page 15

Chapter3
PEAP
WPA2 Enterprise - PEAP
If you selected PEAP, configure the following:
Logn Name
Enter the login name of your wireless
network.
Password Enter the password of your wireless network.
Server Name Enter the name of the authentication server
(this is optional).
Certfcate
Select the certificate you installed to
authenticate you on your wireless network. If you want to
use any certificate, keep the default, Trust Any.
Inner Authen. Select the authentication method used
inside the PEAP tunnel.
Click Next to continue, or click Back to return to the
previous screen.
RADIUS
RADIUS features use of a RADIUS server. (This should
only be used when a RADIUS server is connected to the
Router.) RADIUS offers two authentication types: EAP-TLS
and PEAP.
Authentcaton
Select the authentication method your
network is using, EAP-TLS or PEAP.
Dual-Band Wreless-N ExpressCard
EAP-TLS
RADIUS - EAP-TLS
If you selected EAP-TLS, configure the following:
Logn Name
Enter the login name of your wireless
network.
Server Name
Enter the name of the authentication server
(this is optional).
Certfcate Select the certificate you installed to
authenticate you on your wireless network.
Click Next to continue, or click Back to return to the
previous screen.
PEAP
RADIUS - PEAP
If you selected PEAP, configure the following:
Logn Name
Enter the login name of your wireless
network.
Password Enter the password of your wireless network.
Server Name Enter the name of the authentication server
(this is optional).
Configuration
1