Linksys WEC600N User Manual page 13

Chapter3
WEP
Make sure the settings you configure match the settings
of your wireless network.
WEP
WEP Select -bt or 128-bt encryption.
Passphrase
Enter the network's Passphrase, so a WEP
key is automatically generated. It is case-sensitive and
should not be longer than 16 alphanumeric characters.
This passphrase must match the passphrase of your other
wireless network devices and is compatible with Linksys
wireless products only. (If you have any non-Linksys
wireless products, enter the WEP key manually on those
products.)
WEP Key If you do not have the Passphrase, enter the
WEP key of your wireless network. For 64-bit encryption,
enter exactly 10 hexadecimal characters. For 128-bit
encryption, enter exactly 26 hexadecimal characters. Valid
hexadecimal characters are "0" to "9" and "A" to "F".
Advanced Users
TX Key The default is 1. If your network's wireless router
or access point uses transmit key number 2, 3, or 4, select
the appropriate number.
Authentcaton The default is Auto, so it will auto-detect
for Shared Key or Open System authentication. For Shared
Key authentication, both the sender and the recipient
share a WEP key for authentication. For Open System
authentication, the sender and the recipient do not share
a WEP key for authentication. If you are not sure which
authentication method to select, keep the default, Auto.
Click Next to continue, or click Back to return to the
previous screen.
WPA Personal
WPA Personal offers two encryption methods, TKIP and
AES, with dynamic encryption keys.
Dual-Band Wreless-N ExpressCard
WPA Personal
Encrypton Select TKIP or AES.
Pre-shared Key
Enter the network's Pre-shared Key of
8-63 characters.
Click Next to continue, or click Back to return to the
previous screen.
WPA2 Personal
WPA2 Personal uses the encryption method, AES, with
dynamic encryption keys.
WPA2 Personal
Pre-shared Key
Enter the network's Pre-shared Key of
8-63 characters.
Click Next to continue, or click Back to return to the
previous screen.
WPA Enterprise
WPA Enterprise features WPA security used in coordination
with a RADIUS server. (This should only be used when a
RADIUS server is connected to the Router.) WPA Enterprise
offers two authentication methods, EAP-TLS and PEAP,
Configuration
12