PROFINET connection
3.2 Remote service
Creating users
1. Click the "Create" button and configure the user with the following settings:
2. Click the "Finish" button.
Result
A user is created on the SINEMA RC for the service technician and the SCALANCE M874-3
device.
To connect the SCALANCE M874-3 to SINEMA RC, you need the device ID and CA certificate.
You can find this data in the device information.
In the navigation area click on "Remove connections" > "Devices" to open the device
information and for "Actions" click on the
52
Tab
Contact data
Rights
Group membership
VPN connection mode
Password
Parameter
User names
Logon procedure
Force comment
Service_Admin
-
New password
Confirm password
symbol,
Getting Started, 07/2020, C79000-G8976-C507-03
Setting
Service
Password
Activate
When the VPN tunnel between SINEMA
RC client and server is ended, the user is
requested to enter a comment. Only then
can the current session be closed. The
comment is entered in the log of the
SINEMA RC server.
Activate
Apply default settings
Enter a password and repeat it.
Cloud Connector