Rotary Hook Drive Mechanism - Brother CS8000 Series Service Manual

Main unit
1
Tension pulley assy. attachment
1. Attach the tension pulley assy. 1 to the arm bed.
2
Feed module attachment
1. Attach the feed module to the arm bed using screws 1 (two).
*Key point
• Hand start screw 1, and fully tighten after 4 - 6 "Needle-
presser module and feed module left-right position alignment."
• After attaching the feed module/thread cutter module, always
perform 3 - 28 "3 Needle interference provisional adjustment
(needle bar, presser back-front position adjustment)Needle
interference adjustment.
1

Rotary hook drive mechanism

Giza Tite
4X14
Color; Gold
www.promelectroavtomat.ru
1
Torque
Hand start
1
3 - 27