Brother CS8000 Series Service Manual page 139

Modules
6
Feed adjuster assy. attachment
1. Attach the feed adjuster assy. 1, polyester slider 2 and spring
bushing supporter assy. 3.
*Key point
S14
• Attach spring
the side having the smaller spring diameter.
2. Attach the bushing supporter assy. 3 and feed adjuster assy. 2 to the feed
base 4 using screws 1 (two).
Lubricate the feed adjuster assembly shaft with
turbine oil #100
Apply Epnoc Grease AP to the entire operating
part of the feed adjuster assy. feed regulator.
Start movie clip (CD-ROM version only)
1
S14
8.8
7
Stopper plate block assy. attachment
1. Attach the stopper plate block assy. 1 using screw 1.
Start movie clip (CD-ROM version only)
1
Feed module
to the feed adjuster assy. 2 starting with
Screw, Bind
M4X6
1.18 – 1.57 N
Color; Silver
9.9
5.5
Screw, Bind
M4X5
1.18 – 1.57 N
Color; Silver
www.promelectroavtomat.ru
1
to the
S14
1 – 2 drops
Small amount
Torque
−
m
SPRING
XC2531***
Torque
−
m
2 3
S14
3 4
1
1 1
3 - 67