Brother CS8000 Series Service Manual page 69

Modules
13
Feed supporting plate spring removal
1. Remove the spring
S12
14
Lower shaft B assy. removal
1. Remove screws 1 (two), and remove the joint 1.
2. Remove screws 2 (two), and remove shaft bushing presser A 2.
3. Remove the lower shaft B assy 3.
4. Remove bushing supporter A 4 from the feed base.
Start movie clip (CD-ROM version only)
Feed module
.
www.promelectroavtomat.ru
S12
1 1
2 2
4
3
2 - 49