Brother CS8000 Series Service Manual page 145

Modules
15
Feed bar attachment
1. Apply a small amount Molykote EM30L to the shaft holes 1 (two) in the
feed bar.
2. Attach retaining ring E2 to feed bar shaft B 2.
3. Attach the feed bar 3, feed bar shaft A 4, feed bar shaft B 5 and feed bar
spacer 6 to feed arm A 7 using screws 1 (two).
*Key point
• Feed bar shaft A 4 is attached from the inside of the feed bar
3.
• Move feed bar shaft B 5 to the left.
Apply Molykote EM30L grease to feed shaft
holes in the feed bar
Apply Molykote EM30L grease to feed bar shaft
A
Apply Molykote EM30L grease to feed bar shaft
B
Start movie clip (CD-ROM version only)
1
16
Feed bar spring attachment
1. Attach spring to the feed bar 1 and vertical feed shaft 2.
S17
*Key point
• Align the vertical rod 3 with the vertical lever seat 4.
Start movie clip (CD-ROM version only)
S17
A hook form is a Left-right object.
Feed module
Set Screw, Socket (CP)
M4X4
1.18 – 1.57 N
Color; Black
22.8
2.6
www.promelectroavtomat.ru
Small amount
Small amount
7
Small amount
Torque
−
m
SPRING
XC2547***
2
1 Retaining
ring E2
6 4 3 5 7
1
1 3
4
S17
3 - 73