Table of Contents
Advertisement
Hardware – N2E
Powering the Gateway
The following steps will allow you to properly and safely power the gateway.
Warning:
1)
failure! Use the Screw Terminal's power
connection!
2)
1) Connect a 12-24 VDC power source to the gateway, Red Wire = (+) Black Wire = (-).
a) The unit draws 8 VDC 900mA (7.2W) Max
b) The unit draws 35 VDC 900mA (31.5W) Max
c) The gateway has a voltage operating range from 8-35 VDC, 24 VDC is recommended.
Real Time Automation, Inc.
Improper wiring will cause unit
9
1-800-249-1612
Advertisement
Table of Contents
