S7 Client Configuration - Real Time Automation 460SCQT-N2E Product User Manual

S7 Client Configuration

Click the S7 Client PLC button to access the configuration page.
1) Select which Network Interface to use for this S7 client PLC connection. If using single port
hardware, the Network Interface will default to Ethernet Port only.
2) Delay Between Messages: Enter the length of time to delay between read and write scan line
requests (ms).
3) Response Timeout: Enter the amount of time the gateway should wait before a timeout is issued for
a read/write request (ms).
4) Delay Between Connect Attempts: Enter the amount of time the gateway should wait between
attempts to connect to the PLC.
5) Dependency Protocol: If enabled, the Siemens S7 PLC communication will stop if communication to
the selected protocol is lost.
Real Time Automation, Inc. 21 1-800-249-1612