String Mapping - Explanation - Real Time Automation 460SCQT-N2E Product User Manual

String Mapping – Explanation
Below are the different parts that can be modified to make up a string mapping.
String data types can only be mapped to other string data types. There is no manipulation that can be
done on the string.
1) Enable (red box above):
2) Source Field (yellow box above):
a) Group - Select the string data group you set up in the protocol config to use for this mapping.
b) String - This is the string used for this mapping.
3) Destination Field (green box
a) Group - Select the string data group you set up in the protocol config to use for this mapping.
b) String - This is the string where the data is being stored.
Real Time Automation, Inc.
Check to enable mapping. If not checked, this mapping is skipped.
above):
61 1-800-249-1612