Table of Contents
Advertisement
Intelligent Reset Button
If the IP Address of the gateway is forgotten or is unknown, there is an easy way to recover the IP
Address using a reset button on the hardware.
1) On the front of the gateway below the Power LED, there is a small pinhole. Using a paperclip,
press the button through this pinhole and hold the button for at least 5 seconds.
2) After 5 seconds, the unit will acknowledge the command and LED 1 and LED 2 will start an
alternate Blink Green quickly pattern.
3) Release the button and the gateway will reset both Ethernet ports to default IP settings (DHCP).
Real Time Automation, Inc.
86
1-800-249-1612
Advertisement
Table of Contents
