Hazet 4794/48 Operating Instructions Manual page 34

Spare Parts
• Only use the manufacturer's original spare
parts.
• Unsuitable or defective spare parts may cause
damage, malfunction or total failure of the tool.
The tool has be stored according the following
conditions:
• Keep tool in a dry and dust­free place.
• Do not expose the tool to liquids and aggres­
sive substances.
• For disposal, clean tool and disassemble it
according to the regulations for work safety
and environmental protection. Components
can be recycled.
Maintenance work on engines must be carried out only by experienced mechanics.
34
Maintenance and Cleaning
4
Storage
5
Disposal
6
Always wear personal protective equipment.
• The use of non­approved spare parts will void
all warranty, service and liability claims as well
as all claims for compensation against the
manufacturer or its agents, distributors and
sales representatives.
• Do not store the tool set outdoors.
• Keep tool set out of reach of children
• Storage temperature: ­10 up to +40°C.
• Relative air humidity: max. 60%.
• Metal components can be scrapped.
• Reducing environmental
preserving the environment are at the heart of
our activities.
pollution and