BONTEC CT128 Installation Instruction

UNPACKING INSTRUCTIONS

Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
Check package contents against the Supplied Parts List in the next page to assure that all components were
received undamaged. Do not use damaged or defective parts.
Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

Install and operate this device with care. Please read this instruction before beginning the installation, and carefully
follow all instructions contained herein. Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you:
If you don't understand these directions or have any doubts about the safety of the installation.
If you are uncertain about the nature of your wall, consult a qualified installation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby
disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use
of this product.
!
WARNING

Tools Required

Note:
The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or
to cinder block walls. If the hardware you need for your installation is not included, please consult your local hardware store for proper
mounting hardware for the application.
Installation Instruction
This TV mount must be securely attached to the vertical wall. If the
mount is not properly installed it may fall, resulting in possible injury
and/or damage.
4mm Drill Bit
Phillips Screwdriver
CAUTION!
10mm Masonry Bit
Stud Finder
1
English
CT128
Wrench or Socket Set
Carpenter's Level