Functional Parameters Of Multi-Segment Speed - DEMA D5M Series Manual

NO.6 Detailed Function Description

6.5 Functional parameters of multi-segment speed

P080
Operation mode selection
0: Common operation refers to operation in a commonly controlled way.
1: Internally controlled multi-segment speed (16-segment speed)
[Description] 1) 16-segment speed is composed by main speed and 15-segment
speed;
2) Acceleration/deceleration time of each segment speed is set through P084 and
P085;
3) Operating time is set by timers P101-P116 and timers for unused control segments
are set as 0;
4) Operating direction of each segment speed is set through P082 and P083;
5) Under operation of internally controlled multi-segment speed, operating time and
direction is dependent on the setting of internal parameters, with invalid external time
and forward/reverse switching.
2: Externally controlled 4-segment speed (refer to function description for high-speed,
medium-speed and low-speed terminals P044-P049)
3: Externally controlled 16-segment speed
Multi-function digital input terminal
Multi
Multi-s
-seg
egmen
ment
t speed
spee
I
d II
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
48
Setting range
1-5
Multi
Multi-s
-seg
egmen
ment
t speed
spee
III
d IV
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON OFF
Unit Ex-factory value
1
Main frequency
For multi-segment speed II, the frequency is
determined by P086
For multi-segment speed III, the frequency is
determined by P087
For multi-segment speed IV, the frequency is
determined by P088
For multi-segment speed V, the frequency is
determined by P089
Alteration
0
Result
╳