4.1 Description of operation panel appearance and key function
[Note] Two switching modes of forward and reverse rotation are provided for D5M:
1) Press and hold down the key FOR/REV;
2) Press the key Program (PROG), then use the keys ▲ and ▼ to select; enter
parameter setting interface if pressing the key Program (PROG) again.
4.2 Description of indicator functions
Indicator
FOR
REV
RUN
STOP
PRM
12
No.4 Manipulator Description
Figure 4-1 D5M Series Digital Manipulator
Function description
Motor forward
Motor reverse
Motor is running
Motor is stopped
Display motor speed
NO.4 Manipulator Description