6 Detailed Function Descriptions; Basic Function Parameters - DEMA D5M Series Manual

No.6

6.1 Basic function parameters

P000
Parameter locking
0: Invalid
1: Valid i.e. parameter locking, meaning other parameters are unchangeable
except this parameter.
This parameter can avoid mistake operation of non-operators which may cause unnecessary
danger and mistake. But after locking parameters, the current frequency can be changed
through keys ▲ and ▼.
P001
Selection of control mode
0: Keyboard setting
1: External terminals setting
terminals.
2: Communication interface setting
transmission of communication interface
P002
Frequency setting selection
0: Keyboard setting
1: Analog quantity setting Former operating frequency is controlled by input analog signals
and signal type is decided by P070.
2：Communication interface setting
communication.
3: Potentiometer of manipulator
on manipulator.
P003
Main frequency
Detailed Function Descriptions
Setting range
0-1
Setting range
0-2
Operating command is set by keyboard.
Operating command is set by 6-way programmable input
Setting range
0-3
P003 of former operating frequency is set by keyboard.
Refer to P070-P076 for relevant parameters.
Current operating frequency is set by serial port
Current operating frequency is set by potentiometer knob
Setting range
0.00-400.00 Hz
NO.6 Detailed Function Description
Unit Ex-factory value
1
Unit Ex-factory value
1
Operating command
Unit Ex-factory value
1
Unit Ex-factory value
0.01 Hz
Change
╳
0
Alteration
╳
0
is set
Alteration
╳
0
Alteration
╳
*
by
25