Advertisement
9.36 Registr
9.36
Registration front/
ation front/rear actuator holde
Note:
Note:
• • As the Und
As the Under bar is eas
er bar is easy to bend, b
(1)
(1) Relea
Release the Hook p
se the Hook part of the Un
(2) Raise
(2)
Raise the Lase
the Laser R FG pl
(3) Remov
(3)
Remove the T
e the Taptite cu
right side of the LVPS shield plate in the direction of the arrow A to remove it from the Pin.
right side of the LVPS shield plate in the direction of the arrow A to remove it from the Pin.
And then pull it out in the direction of the arrow B to remove it from the machine.
And then pull it out in the direction of the arrow B to remove it from the machine.
<Bottom side>
<Bottom side>
<Back side>
<Back side>
Pin
Pin
LVPS shield plate
LVPS shield plate
rear actuator holder ASSY
y to bend, be careful t
e careful to handle it
art of the Under R FG wir
der R FG wire from the L
r R FG plate sli
ate slightly t
ghtly to remov
o remove it fro
aptite cup S M3x8 SR screw and th
p S M3x8 SR screw and the T
Under bar
Under bar
Laser R FG plate
Laser R FG plate
Fig. 3-100
Fig. 3-100
r ASSY
o handle it. .
e from the LVPS shiel
VPS shield plate.
d plate.
e it from the Pin
m the Pin. .
e Taptite bin
aptite bind B M4x12 screw
d B M4x12 screw, pull out the
Hook part
Hook part
Under R FG wire
Under R FG wire
B
B
Taptite cup S
Taptite cup S
M3x8 SR
M3x8 SR
, pull out the
<Rear view of
<Rear view of
Frame R>
Frame R>
LVPS shield
LVPS shield
plate
plate
A
A
Taptite bind B
Taptite bind B
M4x12
M4x12
Advertisement
