Download Print this page

Brother DCP-7090 Service Manual page 36

Laser mfc
Hide thumbs Also See for DCP-7090:

Advertisement

Error message
Upper line
Supplies
Drum End Soon
Replace Drum
Replace Toner 
Toner Low
Toner Ended
Open the Front
Cover, replace
Toner Cartridge.
Touchscreen
Remove any
Initialisation
material which is on
Failed
the touchscreen.
Tray removed
Change the
settings?
Wrong Paper
Reload correct
Size MP
paper in MP Tray or
press [Retry].
Wrong Paper
Reload correct
Size T1
paper in Tray 1 or
press [Retry].
Wrong Toner
Open the Front
Cartridge
Cover, then install
the Toner Cartridge.
Lower line
Number of the drum unit
rotations reaches the upper limit
soon.
Number of the drum unit
rotations has reached the upper
limit.
Dot count or develop roller
counter of the toner cartridge in
models without toner box is
reaching the upper limit in the
continuous printing mode.
Dot counter of the toner
cartridge or develop roller
counter reaches the upper limit
soon.
The amount of toner supplied of
the toner box reaches the upper
limit soon.
Toner cartridge in models
without toner box has reached
the upper limit in the continuous
printing mode.
 An error occurred while
initializing the touch panel.
Paper tray is open.
MP tray ran out of paper and the
paper tray alternatively chosen
has paper in different size when
the paper used for copy was
from the MP tray and the choice
of tray was set to Auto.
Paper tray ran out of paper and
the MP tray alternatively chosen
has paper in different size when
the paper used for copy was
from the paper tray and the
choice of tray was set to Auto.
Cartridge sensor detected that
the incompatible toner cartridge
was installed.
Error
Description
codes
4000
4200
4D01
4B01
4B06
4E01
D800
---
---
---
2200
Refer
to:
2-52
2-52
2-52
2-52
2-52
2-52
2-71
4.14.5
4.14.1
4.14.1
2-51

Advertisement

loading