Advertisement
APPENDIX 2 DELETING USER SETTING
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
For models without touch panel
(1) Press the [Menu] while the machine is
in the ready state.
(2) Press the [
▲
Setup" on the LCD, and press the
[OK].
(3) Press the [
▲
"Reset" on the LCD, and press the
[OK].
(4) Press the [
▲
"Machine Reset" on the LCD, and
press the [OK].
"Machine Reset
appears on the LCD, and press the
[
].
▲
(5) "Reboot OK?
the LCD. Press the [
user setting information and return the
machine to the ready state.
INFORMATION
] or [
] to display "Initial
▼
] or [
] to display
▼
] or [
] to display
▼
Reset
Exit"
▲
▼
Yes
No" appears on
▲
▼
] to delete the
▲
For models with touch panel
(1) Press the [Settings]
machine is in the ready state.
(2) Press the [ALL Settings] on the LCD.
(3) Press the [Initial Setup] on the LCD.
(4) Press the [Reset] on the LCD.
(5) Press the [Machine Reset] on the
LCD.
(6) "Factory Reset? It may take time until
reset finishes. Yes No" appears on the
LCD. Press the [Yes].
(7) "Machine will reboot after resetting.
Press [OK] for 2 seconds to confirm."
appears on the LCD. Press and hold
the [OK] for 2 seconds or longer to
delete the user setting information
and return the machine to the ready
state.
while the
Advertisement
