Advertisement
Paper jam in the paper eject section of the ADF
<User Check>
• Check that the thickness of the document is 64 to 105 g/m
Step
Foreign object in the ADF
1
document eject path
Document pinch roller coming
2
off
Abrasion of document eject
3
roller
4
Main PCB failure
4.11.4 Document becomes wrinkled
<User Check>
• Check that the document is not curled.
• Check that the document guide is adjusted to suit the document size.
Step
Abrasion of document
1
separate roller
Abrasion of document feed
2
roller
4.11.5 Document size is not detected correctly
<User Check>
• Check that the document size is within the standard.
Step
Document scanning position
1
actuator caught in some
sections of the machine
2
ADF motor failure
3
Main PCB failure
Cause
Remove the foreign object.
Reattach the document pinch roller.
Replace the ADF unit.
Replace the main PCB ASSY.
Cause
Replace the document separate roller ASSY.
Replace the ADF unit.
Cause
Reattach the document scanning position
actuator.
Replace the ADF unit.
Replace the main PCB ASSY.
2
.
Remedy
Remedy
Remedy
Advertisement
