Safety Points; Repairing A Puncture - Evinci infinity HD Series User Manual

For the rear derailleur turn (A) anti-clockwise while turning the pedals till the
rattle goes away.

Safety points

We recommend a 12-month interval service or every 1000 km.
Important checkpoints are:
▪ Quick-release front axle
▪ headset
▪ stem clamp
▪ bottom bracket and crank
screw

Repairing a puncture

With the motor in the rear wheel, it is more complex to replace a tire or tube.
In case of a puncture, we first recommended to check if the puncture can be
repaired using a patch.
1. Lay bike on the left side side
2. Pull tire of rim
3. Identify the puncture in tube and check tire for any sharp objects to be
removed
4. If the tube is still repairable apply a patch
5. Refit and pump up the tire
To remove the rear wheel, first, unplug the motor cable at the right side of the
chain stay. When assembling make sure the arrows on the plugs are aligned
and the plug is entirely plugged in. If you get Error 8 on the display, unplug
and try again.
Spoke tension has to be checked on a regular interval. Failing
can cause spoke breakage and will void the warranty
▪ rear wheel axles nuts
▪ seat post clamp
▪ brake caliper screws
▪ spoke tension
15