Throttle; Gears - Evinci infinity HD Series User Manual

ASSIST LEVEL: Your selected level of assistance. 0 = no support, 5 = max
support
MODE BUTTON: Toggles the display information. Shows ODO, trip time, max
speed, average speed and your trip distance.
TRIP: accumulates until manual reset. To manually reset push the (+) and (-)
keys together for >2 sec.
TIME: The total trip time
Walk assistance: you can activate the motor to support you pushing the bike
up a hill. Press and keep depressed the (-) button. After 2 seconds the motor
will start with a maximum speed of 6kph.

Throttle

The left hand side thumb-throttle allows the rider to add power to the selected
assistance level. This can be useful when starting or to give you an extra boost
when riding up a hill.

Gears

If you have to change gears, i.e. to start
in first gear, lift the rear wheel using the
side stand and turn the crank while
changing the gears.
As a rule of thumb gears on a bike are
changed and used similar to a car with a
manual gearbox.
You will start in 2
you will choose gear 6 or 7 to pedal
along. Uphill go back to 3 or for steeper hills gear 1. If you ride faster or
downhill choose higher gears.
The assistance level chosen on the display will assist you up to a certain speed.
Choose the assistance level and gear according to your needs and riding style.
Watch your crank revelations, if you have the feeling you have to push too hard
Walk assistance is not supposed to be used while riding the
bike
Only change gears while pedalling otherwise the derailleur
might get damaged
nd gear, on a flat road
13