Table of Contents
Advertisement
Operation
• Turn on the e-bike electronics by pushing the (l) button for 2 sec
• Select the desired assistance level with the (+) or (-) keys. Start riding.
• Use the throttle as desired to add additional power to the selected
assistance (the throttle does only add power according to the selected
level, this is a safety measure)
• When finished riding press the (l) button for 2 sec to turn the system off
(it will also turn off after 5 min when not used)
Display Operation
BATTERY STATUS
The display shows the battery level with 10 segments and the real voltage. If
the battery reaches the red zone, the controller or battery might turn off when
a higher load is applied, i.e. riding uphill.
POWER DISPLAY
In the upper left area a bar segment display shows how much current the
motor is drawing from the controller. This allows the rider to see how efficient
he or she is riding, less bars means the battery capacity will last longer.
KM/H: Shows your current riding speed
12
Advertisement
Table of Contents
