Complete Conversion - Amana AGR4230BAW Installation Instructions Manual

To Convert Oven Burner
1. Open the oven door and remove oven racks and oven tray
with flame spreader, and set aside.
2. Remove screw from the oven burner. Lift oven burner and
pull the burner toward you. The orifice spud is behind the
oven burner air shutter.
B
A. Oven burner
B. Air shutter
C. Screw
3. Locate Natural gas orifice spud stamped "47" in the bag
containing literature supplied with the range.
4. Use a 7 mm combination wrench to remove the LP gas
orifice spud.
5. Install the number "47" Natural gas spud.
A
A. Natural gas oven orifice spud stamped with "47"
IMPORTANT: Do not overtighten.
6. Place LP gas oven burner spud in plastic parts bag along
with LP gas cooktop burner spuds for future use and keep
with the bag containing literature.
7. Reinstall oven burner.
8. Reinstall oven racks, oven tray, and flame spreader.
W10821262A
© 2015.
All rights reserved.
1. Refer to the "Make Gas Connection" section for properly
2. Turn the manual shut-off valve in the gas supply line to the
3. Refer to the "Electronic Ignition System" section for proper
A
C
4. Close the broiler door and turn the knob to OFF position.
5. Refer to the "Complete Installation" section to complete this

Complete Conversion

connecting the range to the gas supply.
open position.
burner ingestion, operation, and burner flame adjustments.
IMPORTANT: You may have to adjust the LO setting for each
cooktop burner.
Checking for proper cooktop and oven burner flames is very
important. The small inner cone should have a very distinct
blue flame ¼" to ½" (0.64 cm to 1.3 cm) long. The outer cone
is not as distinct as the inner cone. Natural gas flames do not
have yellow tips.
procedure.
12/15