Linksys EFSP42 User Manual page 16

7. When your PrintServer is found, the Device Select window appears, as
shown below. Select the PrintServer you want to configure and click
OK.
8. Enter the Default Name on page10 for your PrintServer in the Device
Name field. You may opt to rename your port, keeping all of your
PrintServer port names unique. Click Select Device Port and select the
port on the PrintServer you are setting up. Click OK.
26
Instant EtherFast ® Series EtherFast 10/100 PrintServers
9. A Output Select window appears. Select the port that your printer is
attached to and click OK. Click OK again when the Configure
PrintServer window appears.
10. When the Printer Ports window appears again, click Close.
11. The Properties window with the name of your printer should reappear
with the new port added to the list. Click OK to confirm your new set-
tings.
27