Advertisement
Integrated Peripherals à Onboard Parallel Port
Onboard Parallel
This item controls the onboard parallel port address
Port
and interrupt.
3BC/IRQ7
378/IRQ7
278/IRQ5
Disabled
Note: If you are using an I/O card with a
parallel port, make sure that the addresses
and IRQ do not conflict.
Integrated Peripherals à Parallel Port Mode
This item lets you set the parallel port mode. The
Parallel Port Mode
mode options are SPP (Standard and Bidirection
SPP
Parallel Port), EPP (Enhanced Parallel Port) and ECP
EPP
(Extended Parallel Port).
ECP
PS/2 compatible mode. EPP enhances the parallel
ECP + EPP
port throughput by directly writing/reading data to/from
parallel port without latch. ECP supports DMA and
RLE (Run Length Encoded) compression and
decompression.
Integrated Peripherals à ECP Mode Use DMA
This item lets you set the DMA channel of ECP mode.
ECP Mode Use DMA
3
1
Integrated Peripherals à EPP Mode Select
EPP Mode Select
This item lets you select EPP mode.
EPP1.7
EPP1.9
AWARD BIOS
SPP is the IBM AT and
3-37
Advertisement
