Advertisement
AWARD BIOS
BIOS Features à Boot Sequence
Boot Sequence
This parameter allows you to specify the system boot
up search sequence. The hard disk ID are listed below:
A,C,SCSI
C,A,SCSI
C: Primary master
C,CDROM,A
D: Primary slave
CDROM,C,A
E: Secondary master
CDROM,A,C
F: Secondary slave
D,A,SCSI
E,A,SCSI
LS: LS120
F,A,SCSI
Zip: IOMEGA ZIP Drive
SCSI,A,C
SCSI,C,A
C only
LS/ZIP,C
BIOS Features à Swap Floppy Drive
Swap Floppy Drive
This item allows you to swap floppy drives. For
example, if you have two floppy drives (A and B), you
Enabled
can assign the first drive as drive B and the second
Disabled
drive as drive A or vice-versa.
BIOS Features à Boot Up NumLock Status
Boot Up NumLock
Setting this parameter to On enables the numeric
Status
function of the numeric keypad. Set this parameter to
Off to disregard the function. Disabling the numeric
On
function allows you to use the numeric keypad for
Off
cursor control.
BIOS Features à Boot Up System Speed
Boot Up System
Select High or Low system speed after boot.
Speed
High
Low
3-8
Advertisement
