Advertisement
AWARD BIOS
PNP/PCI Configuration à Reset Configuration Data
Reset Configuration
In case conflict occurs after you assign the IRQs or
Data
after you configure your system, you can enable this
function, allow your system to automatically reset your
Enabled
configuration and reassign the IRQs, DMAs, and I/O
Disabled
address.
PNP/PCI Configuration à IRQ3 (COM2)
PNP/PCI Configuration à IRQ4 (COM1)
PNP/PCI Configuration à IRQ5 (Network/Sound or Others)
PNP/PCI Configuration à IRQ7 (Printer or Others)
PNP/PCI Configuration à IRQ9 (Video or Others)
PNP/PCI Configuration à IRQ10 (SCSI or Others)
PNP/PCI Configuration à IRQ11 (SCSI or Others)
PNP/PCI Configuration à IRQ12 (PS/2 Mouse)
PNP/PCI Configuration à IRQ14 (IDE1)
PNP/PCI Configuration à IRQ15 (IDE2)
IRQ 3
If your ISA card is not PnP compatible and requires a
special IRQ to support its function, set the selected
Legacy ISA
IRQ to Legacy ISA. This setting informs the PnP
PCI/ISA PnP
BIOS to reserve the selected IRQ for the installed
legacy ISA card. The default is PCI/ISA PnP. Take
note that PCI cards are always PnP compatible
(except old PCI IDE card).
PNP/PCI Configuration à DMA 0
PNP/PCI Configuration à DMA 1
PNP/PCI Configuration à DMA 3
PNP/PCI Configuration à DMA 5
PNP/PCI Configuration à DMA 6
PNP/PCI Configuration à DMA 7
If your ISA card is not PnP compatible and requires a
DMA 0
special DMA channel to support its function, set the
Legacy ISA
selected DMA channel to Legacy ISA. This setting informs
PCI/ISA PnP
the PnP BIOS to reserve the selected DMA channel for the
installed legacy ISA card. The default is PCI/ISA PnP.
Take note that PCI card does not require DMA channel.
3-26
Advertisement
