Advertisement
Power Management à Standby Mode
Standby Mode
This item lets you set the period of time after which
the system enters into Standby mode. In this mode,
Disabled
the monitor power-saving feature activates. Any
1 Min
activity detected returns the system to full power. The
2 Min
system activity (or event) is detected by monitoring
4 Min
the IRQ signals or other events (such as I/O).
8 Min
12 Min
20 Min
30 Min
40 Min
1 Hour
Power Management à Suspend Mode
Suspend Mode
This item lets you set the period of time after which
the system enters into Suspend mode. The Suspend
Disabled
mode can be Power On Suspend or Suspend to Hard
1 Min
Drive, selected by "Suspend Mode Option".
2 Min
4 Min
8 Min
12 Min
20 Min
30 Min
40 Min
1 Hour
Power Management à HDD Power Down
HDD Power Down
This option lets you specify the IDE HDD idle time
before the device enters the power down state. This
Disabled
item is independent from the power states previously
1 Min
described in this section (Standby and Suspend).
.....
15 Min
Power Management à 0V Wake On Modem
0V Wake On Modem
This option lets you specify enable or disable Wake
On Modem function.
Enabled
Disabled
AWARD BIOS
3-21
Advertisement
