HENNESSY INDUSTRIES coats 1400 2D Calibration Instructions

HENNESSY INDUSTRIES coats 1400 2D Calibration Instructions

Advertisement

Wheel Balancer Models
1400 2D, 1500 3D, 1600 3D
Model 1400 Shown
1601 J. P . Hennessy Drive, La Vergne, TN USA 37086 615/641-7533 800/688-6359
HENNESSY INDUSTRIES LLC Manufacturer of COATS®, AMMCO® and BADA® Automotive Service Equipment and Tools.
Model 1500 Shown
Calibration Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for ease
of reference by supervisors and operators.
www.coatsgarage.com
Model 1600 Shown
Manual Part No.:
85610675 05
Revision: 02/20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the coats 1400 2D and is the answer not in the manual?

Questions and answers

Summary of Contents for HENNESSY INDUSTRIES coats 1400 2D

  • Page 1 1601 J. P . Hennessy Drive, La Vergne, TN USA 37086 615/641-7533 800/688-6359 www.coatsgarage.com Manual Part No.: 85610675 05 HENNESSY INDUSTRIES LLC Manufacturer of COATS®, AMMCO® and BADA® Automotive Service Equipment and Tools. Revision: 02/20...
  • Page 2 Calibration Note: Rotate laser dot toward inner flange. 8. After spin, raise the hood. Rotate wheel to line up/ Machine Calibration center of 4-ounce calibration weight with laser dot. Hold 1. Enter the MACHINE CALIBRATION mode. position while pressing NEXT. 2.

This manual is also suitable for:

Coats 1500 3dCoats 1600 3d

Table of Contents