Warm - Breville Smart Oven BOV860BTR1BUS1 Instruction Book

2. Place food, positioned on the included
roasting pan, pizza pan or other oven-proof
dish, on the center of the wire rack so air will
flow around all sides of the food.
3. Close the oven door.
4. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
REHEAT function. The top figure on the
LCD screen indicates the preset REHEAT
temperature of 350°F while the bottom
figure indicates the preset time of ':15 MINS'.
The preset CONVECTION setting will also
be displayed.
SUPER
5. The reheating temperature, time, convection
and frozen settings can be adjusted before or
during the reheating cycle.
a) The reheating temperature is displayed
as the top figure on the LCD screen.
Turn the TEMPERATURE dial to
adjust the temperature from 120°F to a
maximum of 450°F.
b) The reheating time is displayed as the
bottom figure on the LCD screen. Turn the
TIME dial to adjust the time up to 2 hours.
6. Press the START/CANCEL button to
activate the REHEAT function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange.
7. The timer will be displayed and begin to
count down. The temperature and time can
be adjusted during the reheating cycle by
turning the corresponding TEMPERATURE
and TIME dial. The cycle can be stopped
at any time by pressing the START/
CANCEL button.
CONVECTION
SUPER CONVECTION
8. At the end of the REHEAT cycle, the oven
alert will sound. The START/CANCEL
button backlight will go out and the LCD
screen will illuminate blue.
WARM FUNCTION
The WARM function maintains hot food at the
recommended temperature to prevent bacterial
growth, 160°F or above.
1. Insert the wire rack into a rack position
that best suits the type of food you are
keeping warm.
2. Place food, positioned on the included
roasting pan, pizza pan or other oven-proof
dish, on the center of the wire rack so air will
flow around all sides of the food.
3. Close the oven door.
4. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
SUPER CONVECTION
WARM function. The top figure on the LCD
screen indicates the preset temperature of
160°F', while the bottom figure indicates
the preset time of ':1 HRS'. The preset KEEP
WARM symbol will also be displayed.
SUPER
5. The temperature, time and convection
settings can be adjusted before or during
the warming cycle.
a) The warming temperature is displayed
as the top figure on the LCD screen.
Turn the TEMPERATURE dial to
adjust the temperature from 120°F to a
maximum of 450°F.
b) The time is displayed as the bottom
figure on the LCD screen. Turn the TIME
dial to adjust the time up to 2 hours.
SUPER CONVECTION
CONVECTION
17
SUPER