Table of Contents
Advertisement
1. CYLINDER UNIT REPLACEMENT
A. Remove the Mechanism unit from MAIN C.B.A./Chassis by
referring "Disassembly Procedure".
B. Remove the 3 screws (A) of the CYLINDER UNIT with a screw
driver.
C. Unlock the 4 locking tabs (B) and disconnect the Cylinder
flexible card from the FPC Holder.
D. Remove the CYLINDER UNIT.
CAUTION
Handle the Cylinder flexible card with care. When it damaged, you
should replace whole Cylinder unit.
2. UPPER CYLINDER DISASSEMBLY
A. Remove 2 screws (A).
B. Remove the Cylinder Stator Unit.
C. Remove 2 screws (B).
D. Remove the Cylinder Rotor Unit.
E. Loose Hex screw (C) (1.5 mm) and remove the CYLINDER
RETAINER.
F. Remove the Upper Cylinder.
Fig. S6
Fig. S7
11
Advertisement
Table of Contents
