Table of Contents
Advertisement
1. Remove the Top Panel and Mechanism unit with Main C.B.A. by
referring the Disassembling Procedure.
2. Unsolder the Lithium Battery: B6001 "CR2354-1GUF" and then
replace it into new one. (See Fig.B1)
NOTE:
The lithium battery is a critical component (Type No.:CR2354-1GUF
Manufactured by Panasonic.)
It must nerver be subjected to excessive heat or discharge.
It must therefore only be fitted in equipment designed specifically
for its use.
Replacement batteries must be of the same type and manufacture.
They must be fitted in the same manner and location as the original
battey, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other
purpose.
It should be disposeed of in waste products destined for burial
rather than incineration.
Fig.B1
7
Advertisement
Table of Contents
