Table of Contents
Advertisement
1. Removal of compulsory loading.
A. Press FF and EJECT buttons simultaneously and set the
Service Mode 7.
B. Press STOP button in order to unload the mechanism. (Pay an
attention of tape slack)
Service Mode Indication:
7 ** ** (STOP)
2. Removal of manual operation of Main cam gear.
A. Disconnect the AC power cord and remove Top Panel.
B. Rotate Main Cam Gear to the clockwise and unload the
mechanism (Tape is remaining)
C. Rotate the Pole of Capstan motor to the clockwise the from the
bottom in order to remove the tape slag.
D. Rotate Main Cam Gear to the clockwise in order to eject the
cassette tape.
2.4.4. CYLINDER UNIT REPLACEMENT
1. CYLINDER UNIT REPLACEMENT
A. Remove the Mechanism unit from MAIN C.B.A./Chassis by
7 00 ** (EJECT)
Fig. S4
Fig. S5
11
(Fig.
S4).
Advertisement
Table of Contents
