Troubleshooting - KitchenAid 5K45SSN Owner's Manual

TROUBLESHOOTING

Plug into an earthed outlet.
Do not remove an earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re,
or electrical shock.
PROBLEM
If Stand Mixer warms up
during use:
The Stand Mixer emit a
pungent odor:
If the Flat Beater hits the
Bowl:
If your Stand Mixer should fail
to operate, please check the
following:
If the problem cannot be
corrected:
KITCHENAID and the design of the stand mixer are trademarks in the U.S. and elsewhere.
W11520569A.indb 13 W11520569A.indb 13
WARNING
Electrical Shock Hazard
Under heavy loads with extended mixing time periods, you
may not be able to comfortably touch the top of the unit.
This is normal.
This is common with electric motors, especially when new.
Stop the Stand Mixer. See the "Beater to Bowl Clearance"
section and adjust the Beater to Bowl Clearance.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working
order? If you have a circuit breaker box, be sure the circuit
is closed.
Turn off the Stand Mixer for 10-15 seconds, then turn it back
on. If the Stand Mixer still does not start, allow it to cool for
30 minutes before turning it back on.
Then contact KitchenAid or an Authorized Service Center.
Do not return the Stand Mixer to the retailer; retailers do
not provide service.
©2022 All rights reserved.
SOLUTION
13
6/17/2022 3:26:18 PM 6/17/2022 3:26:18 PM