La Crosse Technology CA79103v2 Setup Manual page 4

LA CROSSE VIEW
Add Your Sensors to the App
Upon getting the station connected to your Wi-Fi network, the next app
screen will explain how your connected sensor(s) should be brought
in. Within the next 15 minutes, you should receive an Add Device
notification in your app. This is indicated by the Red Cloud and the
numbers inside of it. Tap this icon to begin adding your sensor(s) into
the app.
ADD button: Press
minutes each sensor reading will show on their own app page.
DISMISS button: Select
readings to your app.
Note: If
DISMISS
at any time to add it to your app if desired.
Instructions on scanning the barcode to add your sensor is on the next
page.
ADD to add the sensor to your app. Within 10
DISMISS if you do not want the sensor to send
is selected, you can scan the barcode on your sensor
Manually Add Sensor Into the App*
Open your La Crosse View app. On the Main Menu, go to ADD/EDIT and select DEVICES.
1.
On the Devices page, select the ADD DEVICE or PLUS (+) button.
2.
3. Scan the Barcode on your Breeze Pro Sensor or type in the Device ID manually.
Confirm the sensor image and Device ID and add a Device Name and Location Name. Select DONE.
4.
123456-ABC
* This step is only required if you do not receive the Add Device notification within the app.
05 Prior to connecting to Wi-Fi and mounting your sensor, make sure your station is receiving sensor data.
123456-ABC
06