La Crosse Technology CA79103v2 Setup Manual page 10

FORECAST
Viewing Your Forecast Data
Daily and Hourly Forecast Buttons
When connected to Wi-Fi, use the daily forecast (
the top of the station to view future forecast information.
Daily Forecast
• Hold the button to scroll through all 7 days
of future forecasts. When scrolling, press the
button to stop the scroll and return to main display.
• Press and release the button to view each
day individually.
Day/Night Forecast
When connected, the sun icon will show in daylight hours and the moon icon will show
during nighttime hours if the forecast is for sunny or partly sunny.
Sun Icon (7:00am to 7:00pm) Moon Icon (7:00pm to 7:00am)
) and hourly forecast ( ) buttons on
Hourly Forecast
• Hold the button to scroll through all 12 hours
of future forecasts. When scrolling, press the
button to stop the scroll and return to main display.
• Press and release the button to view each
hour individually.
• The times the sun and moon icons
appear are pre-programmed and
cannot be adjusted.
• The station must be connected
Wi-Fi to activate the day/night
forecast feature.
PRESSURE
Relative Pressure
•
Your Relative Pressure reading will come
from your station's internal barometer.
•
Please allow up to 10 days for automatic
calibration, or program your local pressure
value in the Settings Menu.
•
The arrows located to the left of the values
represents Pressure Tendency ( / ).
•
Select your desired unit of measurement
(hPa or InHg) in the Settings Menu.
You can also set a specific pressure
number setting if desired.
Note:
The default pressure reading is 1013 hPa (29.92 INHg).
The station will acclimate on it's own if the pressure number
17
is not set.
SENSORS
Spot Water Leak Sensor
Your Water Leak Sensor data shares the
same display area as the pressure readings.
How to View Additional Data in the
Extra Sensor Field
Press the EXTRA button on the top of the
station to view Water Leak, Pressure, other
add-on sensors data (see page 18), or select
Auto Scroll to toggle through all of available
readings.
When the Auto-Scroll feature is active, the
Auto Scroll icon ( ) will appear in the Extra
Sensor field. Each reading will show for 6
seconds and the sensor icon will blink
every 2 seconds. 18