Table Of Contents - La Crosse Technology CA79103v2 Setup Manual

Table of Contents

BASICS LA CROSSE VIEW
Initial Setup 02 Connecting to the App
Station Settings 07 Connecting Your Station
Buttons 08 Add Your Sensors to the
LCD Display Brightness 09 App
Auto-Dim Settings 09 Add-On Sensor Info
Time and Calendar 10
FORECAST PRESSURE
Viewing Your Forecast Data 15 Relative Pressure
Seasonal Trees 15
Standalone Forecast Icons 16
Enhanced Forecast Data 16
Daily/Hourly Forecast 17
APPENDIX
Specifications 21
Cautions/Statements 21-23
Warranty 21
Recycling & Disposal 22
TEMP. AND HUMIDITY
03 Viewing Your TH Data 11-12
04 History Records 13
05 Outdoor Comfort Meter 13
18 Temp. & Humidity Alerts 14
20
SENSORS
18 Water Leak Sensor 18-19
Mounting Your TH Sensor 19
Add-On Sensor Info 18, 20
Adding an Extra Sensor 20
BASICS
Initial Setup
Power Up
Weather Station
Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack on the back of the
station. Next, remove the Insulation Tab from the Station's Battery Compartment.
Thermo-Hygro Sensor
Install 2 fresh "AA" batteries according to polarity and replace battery cover. The blue LED light will
flash when transmitting.
Water Leak Sensor
Remove the front cover by twisting counter-clockwise to the unlock position. Install 2 fresh "AA"
batteries according to the polarity markings. The LED light will flash blue when batteries are inserted.
Replace front cover and turn clockwise to locked position.
Note: It may take up to 10 minutes for your sensor data to appear on your
station's screen.
02