Adding New Switch Ports - Linksys EG24M User Manual

c) Enter a name for the new VLAN (up to 31 alphanumeric characters).
d) Press Enter. The VLAN name appears next to VLAN Name in
the New VLAN Settings screen.
6. Press the Esc key. A screen similar to the following will appear.
This screen will allow you to add or delete switch port to a VLAN.

Adding New Switch Ports

To add new switch ports to the newly created VLAN:
1. Hold down the Shift key and press "+" to display the Port Options screen.
2. In the Port Options screen, highlight either Untagged Ports or Tagged Ports
and press the Enter key.If you highlight Untagged Ports, the screen win-
dow reads Select Untagged Ports, as in the following screen. Ports not
allowed to be used in specific VLANs are labeled Forbidden Ports.
30
Linksys EtherFast II Series
®
10/100 Managed 24-Port GigaSwitch
If you highlight Tagged Ports, the screen window reads Select Tagged
Ports, as in the following screen.
3. In the Select Untagged Ports or Select Tagged Ports screen, use the Up
Arrow and Down Arrow keys to highlight an individual port.
4. Press Enter. An asterisk appears to the right of the selected port. Repeat
this step for each new port you want to add.
5. After selecting the new ports you want to add, press Esc. A screen will
show the selected ports and whether they are tagged or untagged.
6. If you added untagged ports and want to now add tagged ports, or
vice versa, repeat steps 1 through 4 and in step 2 select the appropriate
port option. To remove a port, highlight the desired port and press "-".
31