Vlan Management > Ports To Vlan; Vlan Management > Vlan To Ports - Linksys SRW208 User Manual

Chapter 5
Assigns a VLAN ID to untagged packets. The
PVID
possible values are 2 to 4094. VLAN 4095 is defined as
per standard and industry practice as the discard VLAN.
Packets classified to the Discard VLAN are dropped.
Enables or disables Ingress filtering on
Ingress Filtering
the port. Ingress filtering discards packets which do not
include an ingress port.
Indicates the LAG to which the VLAN is defined.
LAG
VLAN Management > Ports to VLAN
The Ports to VLAN screen contains fields for configuring
ports to a VLAN. The port default VLAN ID (PVID) is
configured on the Create VLAN screen. All untagged
packets arriving to the device are tagged by the ports
PVID.
VLAN Management > Ports to VLAN
The Ports to VLAN screen contains a Port Table for VLAN
parameters for each ports. Ports are assigned VLAN
membership by selecting and configuring the presented
configuration options.
The VLAN number.
VLAN
Indicates the port belongs to a single untagged
Access
VLAN. When a port is in Access mode, the packet types
which are accepted on the port cannot be designated.
Ingress filtering cannot be enabled/disabled on an access
port.
Indicates the port belongs to VLANs in which
Trunk
all ports are tagged, except for one port that can be
untagged.
Indicates the port belongs to VLANs, and each
General
VLAN is user-defined as tagged or untagged (full 802.1Q
mode).
8-Port 10/100 Ethernet Switch with Webview
Advanced Configuration
Defines the interface as a tagged member of a
Tagged
VLAN. All packets forwarded by the interface are tagged.
The packets contain VLAN information.
Packets forwarded by the interface are
Untagged
untagged.
Forbidden ports are not included in the
Forbidden
VLAN.
Excludes the interface from the VLAN. However,
Exclude
the interface can be added to the VLAN through GVRP.
VLAN Management > VLAN to Ports
VLAN Management > VLAN to Ports
The VLAN to Ports screen contains fields for configuring
VLANs to a ports.
Displays the interface number.
Interface
Indicates the port to VLAN mode. The possible
Mode
field values are:
Indicates the port belongs to VLANs, and each
General
VLAN is user-defined as tagged or untagged (full 802.1Q
mode).
Indicates the port belongs to a single untagged
Access
VLAN. When a port is in Access mode, the packet types
which are accepted on the port cannot be designated.
Ingress filtering cannot be enabled/disabled on an access
port.
Indicates the port belongs to VLANs in which
Trunk
all ports are tagged, except for one port that can be
untagged.
Defines the VLANs to which the interface is
Join VLAN
joined.
Displays the PVID tag.
VLANs
25