Upgrading Firmware - Linksys EG24M User Manual

4. Highlight the port you want to mirror from and press Enter. You will
return to the Port Mirroring Options Screen and your selection will appear
next to Mirror From.
5. Press the Down Arrow key to highlight Mirror Mode and press Enter.
The Mode Options screen will appear.
6. Highlight Receive or Transmit depending on whether the port to be mir-
rored from will be receiving or transmitting, then press Enter. Your selec-
tion will appear next to Mirror Mode in the Port Mirroring Options screen.
7. Press Esc. Your selections will appear in the following screen.
8. To mirror additional ports, repeat steps 2 through 7.
9. When you finish, press the Esc key until you return to the desired screen.
72
Linksys EtherFast II Series
®
10/100 Managed 24-Port GigaSwitch

UPGRADING FIRMWARE

Select File Transfer from the Advanced Management screen. The following
File Transfer screen will appear, with the File Name value highlighted.
Use the following procedure to change a value:
1. Press the Enter key. The Enter File Name screen will appear.
2. Type a name for the Software Upgrade file and press Enter. The name you
typed will appear next to File Name.
3. Use the Down Arrow key to move to IP Address, then press Enter. The
Enter IP Address screen will appear.
73