Spanning Tree Port Priorities; Snmp Functions - Linksys EG24M User Manual

Etherfast ii series 10/100 managed 24-port gigaswitch

Hide thumbs Also See for EG24M:

Table of Contents

Enlarged version

Spanning Tree Port Priorities

Highlight Spanning Tree Port Priorities in the Spanning Tree Protocol screen

and press the Enter key, a Spanning Tree Port Priorities screen similar to the

following will appear.

Use the following procedure to modify the settings in the Spanning Tree Port

Priorities screen:

1. Use the Up Arrow and Down Arrow keys to highlight the a specific port

or highlight All Ports.

2. Press Enter. The Enter Port Priority screen will appear.

3. Type a port priority, from 0 to 255, and press Enter. A low value gives the

port a greater likelihood of becoming a Root port.

4. To change the priorities of other ports, repeat steps 1 through 3.

5. When you finish, press the Esc key until you return to the desired screen.

Linksys EtherFast

II Series

10/100 Managed 24-Port GigaSwitch

If you select SNMP from the Advanced Management screen, the following

SNMP Configurations screen will appear, with the SNMP value highlighted.

The SNMP Configurations screen lets you view all SNMP-related informa-

tion. As this screen shows, the factory default SNMP value is Enabled and

the factory default Community Name value is public.

Use the following procedure to change a value:

1. With the SNMP field highlighted, press the Enter key. The following

SNMP options will appear.

2. Select Disabled or Enabled and press Enter. Your selection will appear

next to SNMP.

3. Use the Down Arrow key to move to Get Community Name and press

Enter. The Enter Get Community Name screen will appear.

Table of Contents